Touratech Zega Pro Pannier System - BMW R1200GS, R1200GS Adventure*

* If you have a 2013-later R1200GS (WC), please check below under Recommended Items.

Touratech Zega Pro panniers provide secure dry storage for adventure riders the world over. The body and removable lid feature rounded lines with rugged, easily-replaceable corner protectors. Low-profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire.

Crafted with 1.5mm aluminum and welded/stainless steel rivet construction these sturdy panniers are available in three sizes: 31-liter, 38-liter and 45-liter.
Watch video.

Zega Pro Pannier systems feature a narrower case mounted offset on the clutch side of your BMW to compensate for the exhaust. If you'd prefer a setup with an exhaust cutout for symmetry, order the Zega Pro Special Set.
(See Recommended Items below.)

Features: Complete set with panniers, rack, and mounting hardware. Available in 3 finishes: bare aluminum, anodized silver, or anodized black. Available in 3 sizes: 31,38, 45 liter sizes. (see dimensions, below) Easy installation. Made in Germany by Touratech. Panniers made from 1.5mm aluminum with welded and stainless steel rivet construction. Electro-polished stainless-steel or Black powdercoated steel racks. Bottle carriers, seat pads, inner bags, and many other accessories available. Replaceable corner protection. Total system width: 31/38-liter = 37 inches, 38/45-liter = 40 inches. Fits 2005-later BMW R1200GS and 2006-later BMW R1200GS Adventure * * If you have a 2013-later R1200GS (WC), please check below under Recommended Items below.

Structure: The Touratech mounting system is the strongest in the industry. German-built 18mm diameter tube racks with 2mm thick sidewalls form a rectangular "hoop" on both sides of the bike to support the panniers. The innovative cross-braced rack system bolts directly to the motorcycle sub-frame transferring the pannier load directly to the bikes chassis. Pannier mounting racks are available in electro-polished stainless steel, or standard black powdercoated steel.

Quick Removal: Touratech Zega Pro panniers attach to the steel mounting racks using heavy-duty composite and steel mounting brackets in four locations. This design offers a very secure fit and allow quick release.

Waterproof: All Touratech panniers have a deep groove aluminum interface with silicone seal. This provides dust proof and waterproof storage even in driving rain and water crossings. Some pannier makers cut corners with a plastic interface between the lid and box. This creates a weak link and often results in breakage and water intrusion.

Dual function latch: The latches on Zega Pro panniers function as release or as a hinge. This allows quick access by releasing one side while the other functions as a hinge. Releasing both latches allows for complete lid removal for easy packing or so you can use the lid as a utility tray for camping.

Security: A spring loaded safety latch ensures that the lid stays closed and its discrete location enhances security. Add a set of optional Integral Locks to each pannier for even more security. (See Recommended Items below.)

Top

Dimensions:
Overall width, 31/38-liter system: 37 inches.
Overall width, 38/45-liter system: 40 inches.
Width, individual cases: 45-liter: 11.5 inches. 38-liter: 9.5 inches. 31-liter: 8.5 inches. (measured across the open boxes)
Height, both systems: 16 inches.
Length, both systems: 17.5 inches.
The high ground clearance of the boxes allows you to negotiate sections of deep sand or ruts. The high ground clearance also helps with cornering at speed.

Top

Finishes:

Available in 3 finishes: Bare Aluminum (left) Silver Anodized (center) Black Anodized (right)
Mounting racks are available in Black Epoxy Coated or Stainless Steel (shown above)

Top