includes mounting adapters for both front and rear Transceivers
on K and R series BMWs (up to 2004) with a 12mm drive-shaft pivot.
The adapters are designed for easy installation on existing hardware.
(See Application Chart, below.)
The adapters are designed for easy installation on existing
hardware. No drilling or modification is required.
There is a 5mm stainless steel dowel pin press-fit
in the adapter which is used to mount the Transceivers facing the wheel.
A nominal air gap of 1/2" (12mm) or less allows the short range communication
between the Transceiver and the Wheel Sensor. Each adapter includes detailed