Now you can add driving lights use heated apparel or
add a high output horn without adding a fuseblock to your CAN bus-equipped
motorcycle. The PDM60 completely eliminates any potential for current
draw related problems commonly associated with CanBus electrical systems.
Read
a review of the PDM60 from the Jan. 2013 issue of BMW MOA magazine.
The PowerPak offers six power circuits: Three 5Amp
and three 15Amp circuts; enough to handle up to six of your gadgets and
accessories. In the event of an electrical short-circuit or fault, the
PowerPak unit automatically interrupts the power supply to the malfunctioning
circuit. To reset it, you simply power the unit down, and back up again.
The PowerPak is simple to install and simple to use.
Connect the power wires directly to your vehicle battery. Connect its
activation trigger wire to any key switch activated power source on your
bike (like the taillight circuit, headlight circuit, etc.) and when you
turn your ignition key, the PowerPak comes to life. It delivers and monitors
power, and provides protection, to all of your aftermarket electrical
/ electronic devices.
PDM
60 Programming Basics
Includes SAE connector which bypasses your CAN Bus
circuitry so it can be used with a Battery Tender to charge your battery. |