Denali D2 LED Lighting Kit - by Twisted Throttle
When bright isn't bright enough, grab
a set of Denali D2 LED lamps. Advances in super-swanky LED technology
have increased the effective light output of the Denali D1 system (read
a review of the D1) by nearly 70% - without increasing the electrical
power drawn by your motorcycle. Consuming only 10 watts (0.83 amps
at 12 volts DC) of power per lamp, it throws a blazing beam of light
in front of you nearly twice as bright as the beam generated by the original
Denali D1.
Find mount kits below under Recommended
Items.
The Denali D2 uses a new patent pending driver to drive
a more efficient MCE LED vs the P7 LED in the Denali D1.
The Smart LED - With Prime Drive Technology you are
getting the most light possible. The most Lumens per LED while prolonging
the life of the LEDs and maintaining the lowest amp draw possible.
Electronic Thermal Management - ETM monitors the heat
output of the LEDs in order to maintain safe operating temperatures and
prolong the LED life span to its full 50,000 hour potential.
Pulse Width Modulator - With the Pulse Width Modulator
technology, the light is dimmable with the use of a separate controller
to allow for optimum flexibility.
Driven - The Denali D2 is driven at 90%, meaning less
energy wasted and more light output. This allows for the most lumen s
while maintaining the optimal operating conditions for the LEDs.
Pure - With 90% optically pure optics, you can be sure
that you are getting the most distance and most accuracy out of each
LED.
As with the Denali D1 system, the D2 is housed in a
rugged waterproof 2" aluminum housing (submersible to 3 meters underwater).
The LED boasts an average life of over 50,000 hours (6+ years) without
ever being shut off.
Limited Lifetime Warranty |
What
do they say about this product on the forums? |
- Kit components:
- 2 x Denali D2 LED light pods
- Wiring Harness with Dimmer Module, Relay and Lighted Switch
- 2 x universal M8 mounting brackets
- 2 x spot driving beam lenses (10 degree beam pattern)
- 2 x flood beam lenses (25 degree beam pattern)
- Installation instructions
*The universal M8 bracket included with this kit will allow you to mount the
Denali lights to many bikes.
The Denali LEDs are housed in a rugged die-cast aluminum
housing for optimum durability and heat dissipation. The housings are IP68
(ingress protection) rated so that they're impenetrable to dust and submersible
under water up to 3 meters. The unbreakable polycarbonate lenses are
housed by a 6061 aluminum face plate which doubles as a radiant heat sink to
melt away snow and ice in frigid conditions. The Denali D2 LEDs have been subjected
to a 14Grms vibration test to ensure their performance in high impact conditions.
The Denali D2 has integrated Prime Drive Technology into
this updated LED light to bring the most powerful light per cubic inch onto
the market. This auxiliary LED lighting kit has a 50,000 hour lifespan,
PWM Dimmability, and Electronic Thermal Management all with extremely low amp
draw making this the most advanced LED light pod on the market.
This kit includes interchangeable lenses that allow you optic
patterns of 10° (Spot) or 25° (Flood).
| ** Our site does NOT reflect what we currently have in stock. Some items may be special ordered from the supplier.
Special orders take 3-7 business days, and backorders can take 5-20 business days for us to receive. |
|