Laminar LIP - BMW R1100 and R1150 RT Motorcycle with "Touring" Windshield
Note: Picture is for illustration only. This LIP is for the Touring windshield the one in the picture is standard height.
This Laminar LIP fits all years
of BMW R1100RT and R1150RT with BMW "touring" windshield.
Available in clear only.
* If your bike has a "standard" or "tall" BMW windshield, you can find the correct
Laminar LIP for your bike below under "Recommended
The LIP is an inverted
airfoil mounted on the top edge of the windshield. As air flows
between the windshield and the LIP, it follows the underside airfoil and is
redirected more vertically. This air eddy then diffuses the oncoming air, in
effect raising the blast of this oncoming airflow. The end result is that
there seem to be three different air speed zones as you ride along at a set
1. Behind the windshield - very little wind speed
2. Above the windshield for 6 to 8 inches or more - a wind pressure well reduced from actual speed
3. Above this height the blast that was at windshield height before the LIP was installed
This Laminar LIP is made of DOT approved acrylic which makes
it scratch and impact resistant. designed specifically for your model. It mounts
with 3M Dual Lock™ or 3M VHB tape. These materials were designed to meet
and surpass the rigors of attachment in an automotive environment. The Laminar
LIP application utility is so unique that it has a Patent Pending. No Holes
need be drilled to mount your Laminar Lip unless you ride Really Fast in which
case you'll want to consider a mechanical mounting method.
|** Our site does NOT reflect what we currently have in stock. Some items may be special ordered from the supplier.
Special orders take 3-7 business days, and backorders can take 5-20 business days for us to receive.|