Laminar LIP - BMW F650GS Motorcycle (2001-03) with Standard Flyscreen

This Laminar LIP is for BMW F650GS Motorcycles equipped with a the standard painted "Flyscreen". (See picture above.) If your bike has a BMW Accesory windshield, check below under "Recommended Items" for a Laminar LIP that works with that windshield.

If you have a BWM F650GS Dakar, see "Recommended Items" below for a Laminar LIP for your bike.

The LIP is an inverted airfoil mounted on the top edge of the windshield. As air flows between the windshield and the LIP, it follows the underside airfoil and is redirected more vertically. This air eddy then diffuses the oncoming air, in effect raising the blast of this oncoming airflow. The end result is that there seem to be three different air speed zones as you ride along at a set speed:

1. Behind the windshield - very little wind speed
2. Above the windshield for 6 to 8 inches or more - a wind pressure well reduced from actual speed
3. Above this height the blast that was at windshield height before the LIP was installed

This Laminar LIP is made of DOT approved acrylic which makes it scratch and impact resistant. designed specifically for your model. It mounts with 3M Dual Lock™ or 3M VHB tape. These materials were designed to meet and surpass the rigors of attachment in an automotive environment. The Laminar LIP application utility is so unique that it has a Patent Pending. No Holes need be drilled to mount your Laminar Lip unless you ride Really Fast in which case you'll want to consider a mechanical mounting method.